PDF TO DOC Conversion Process with Advance Payment

THIS PROCESS IS NOT AVAILABLE

Dear centre,
Here is Genuine project With Advance payout and ref centers with Low upfront and Good payout.

COMMERCIALS:
UPFRONT: RS.5,000 FOR 10 SEATS [BY DD OR WIRE TRANSFER]
CONSULTING : RS 6,000 FOR 10 SEATS [BY WIRE TRANSFER][PAYABLE IN ADVANCE]

PROJECT SPECIFICATION:-
SCOPE OF WORK                                                        DATA CONVERSION (PDF/JPEG/TIFF TO DOC)
TOTAL DURATION OF THE PROJECT                       1 YEAR (11 CYCLES)
ASSIGNMENT                                                            MONTHLY
BILLING                                                                      MONTHLY
NO OF PAGES PER MONTH                                        1000   PAGES / SEAT
ACCURACY REQUIRED                                               99%
REGULAR RATE                                                           RS. 18.00 / PAGE
PROCESSING FEE                                                       500.00 RS. (PER SEAT WORK)
PAYMENT TERMS                                                       50% ADVANCE PAYMENT, 50% AFTER WORK SUBMIT

WE ARE LOOKING FOR QUALITY SERVICE PROVIDER AND WE ARE NOT WORKING WITH ANY CONSULTANT OR MEDIATOR.
NOTE:-

  1. PROCESSING CHARGES ARE NONRFUNDABLE.
  2. PROCESSING CHARGES ARE ONLY FOR YOUR 'QC REPORT '.
  3. COMPANY WILL GIVE YOU FULL QC REPORT.
  4. IF YOU GET LESS THAN 95% ACCURACY IN DEMO WORK THEN COMPANY WILL NOT PROVIDE ANY WORK TO YOU.
  5. NO REASON SHALL BE ENTERED IN NON-COMPLETION OF WORK DATA ON TIME.
  6. COMPANY WILL GIVE TECHNICAL SUPPORT.
  7. AFTER SEEING OUR TECHNICAL SPECIFICATION IF YOU ARE SURE TO DO THIS WORK THEN APPLY FOR THIS WORK.
  8. 'QC REPORT 'IS FINAL FOR BOTH SIDE, IF ANY REPROT IS NOT AS PER OUR ACCURACY PARAMETER THEN WE WILL DISCUSS FOR IT.
  9. MINIMUM 5 SYSTEMS WORK AVAILABLE.




TERMS AND CONDITIONS:-

OUR PROCESSING CHARGES ARE 500.00 INR AS ABOVE DETAILS.

WE WILL GIVE YOU A DEMO WORK AFTER COMPLETED YOUR PROCESS OF SIGNING. YOU MUST HAVE COMPLETED IT WITHIN 10 DAYS AND SEND IT TO US BY MAIL OR BY CURRIOR.

AFTER 10 DAYS YOU WILL GET A ACCURACY REPORT BY US. AS PER OUR ACCURACY PARAMETERS 95% UP ACCURACY REQUIRE FOR SELECTION TO WORK WITH US.

IF YOU WILL GET 95 % UP ACCURACY YOU CAN START YOUR WORK AT NEXT 1ST DATE OF MONTH. AND IF YOU ARE NOT QUALIFIED FOR A WORK WE WILL NOT PROVIDE WORK.

YOU MUST HAVE COMPLETED OUR WORK WITHIN MONTH AND SUBMIT TO US BEFORE A LAST DATE OF MONTH.

WE WILL GIVE YOU 50% ADVANCE PAYMENT WITH YOUR WORK. AND YOU WILL GET YOUR HALF PAYMENT AT 8THDATE OF NEXT MONTH.

SIGNING PRCESS:-

YOU MUST HAVE TO PAY OUR PROCESSING FEES BY 'DD', OR WIRE TRANSFER
  
WHEN WE WILL GET YOUR PROCESSING CHARGE SAME DAY WE WILL GIVE YOU YOUR DEMO WORK.

YOU MUST HAVE TO COMPLETE IT IN A 10 DAYS AND SEND IT TO AT OUR OFFICE ADDRESS BY CURRIOR.

FURTHER PROCESS:-

AFTER 10 DAYS OF YOUR SUBMITION WE WILL GIVE YOU YOUR QC REPORT BY MAIL.

AS PER YOUR QC REPORT IF YOU HAVE GET 95% UP ACCURACY COMPANY WILL GIVE YOU YOUR COMMARCIAL WORK WITH YOUR ADVANCE PAYMENT OF 50% OF YOUR MONTHLY BILLING.

AS PER YOUR QC REPORT YOU HAVE'NT GET 95% ACCURACY THEN COMPANY WILL NOT PROVIDE YOU ANY TYPE OF WORK.

3 comments:

  1. Sir,
    My name is SUSHIL. Please send me full details regarding proof reading process with demo work.

    Thanking You

    ReplyDelete
  2. Sir,
    My name is SUSHIL. Please send me full details regarding PDF TO DOC Conversion Process with demo work.

    Thanking You

    ReplyDelete
  3. Sir,
    My name is SUSHIL. Please send me full details regarding PDF TO DOC Conversion process with demo work. My e-mail id-msk.kumar007@gmail.com

    Thanking You

    ReplyDelete